How BioAktiv Works

BioAktiv has been proven effective in Europe and Australia since the 1990s, but it is relatively new in the rest of the world.  This page is specifically for answering various frequently asked questions including the following:

· How does BioAktiv product work?

· What is the technology BioAktiv uses?

· What is its active ingredient?

What is bio-resonance technology?

Let us start with how BioAktiv products were first developed.  The technology BioAktiv products are based on is proprietary to BioAktiv GmbH, Germany. The company had researched and discovered that natural resonance frequency of oxygen atoms can enhance or catalyze the aerobic bacterial processes in the sub-ecosystems in animal waste matter, compost material, water and topsoil. This phenomenon of reaction of a living organism to a specific frequency pattern can be termed as "bio-resonance". The catalyzed microbial processes bring about the desired results of rejuvenation of topsoil, faster biodegradation of animal and plant wastes, and faster bioremediation of water.

BioAktiv products require only small dosages to activate microorganisms. It should be noted that micro-organisms are activated by their specific bio-resonance frequencies. 

Conclusion:

· Bio-resonance oscillation catalyses certain microbial processes

· Different bio-resonance frequencies activate different microbial processes

 

 

Does it work on animals?

Yes.  The details on how bio-resonance works are yet to be fully understood.  Therefore, BioAktiv technology is not patented.  However, many scientific empirical trials have shown that BioAktiv products can enhance growth and health of livestock animals.

Why a carrier is needed?

To apply bio-resonance oscillation to a microbial sub-ecosystem, a substance is necessary to serve as a medium to carry this physical effect.  BioAktiv uses three such medium substances, called carriers, for its six products.  All the carriers are natural harmless substances.

 

What is the active ingredient?

It should be noted that a carrier only serves as to carry the bio-resonance frequencies. The three carrier materials were chosen not based on their chemical contents but their economic availability and ability to store bio-resonance frequencies readily.  Many other materials can be good carriers as well.  Carrier is not the active component of a BioAktiv product. It is the bio-resonance frequencies stored in it that is providing the required effects. Without the bio-resonance frequencies, a carrier will not provide the desired effects.  BioAktiv product works on a physical property – the ability to induce bio-resonance oscillation in a microbial sub-ecosystem – and not on a chemical or biological active agent. 

Conclusion:

BioAktiv product has an active property and not an active ingredient.  If you must have an active ingredient, then it is the bi-resonance oscillation property and not the carrier.

How is it manufacture?

The manufacturing process for BioAktiv products involves storing or loading the necessary bio-resonance frequencies into a carrier.  The process is done with a high-energy accumulator.  The accumulator has two main parts: a rotating drum that contains that raw carrier material and a high-energy bio-resonance frequency source.  The raw carrier material is placed in the rotating drum which is then set in circular motion.  The high-energy bio-resonance frequency source is then set to oscillate at high power at the resonance frequencies of molecules of certain elements (for example oxygen and trace elements) and compounds contained in the source. The high-energy oscillating field causes the raw carrier material to resonate at specific bio-resonance frequencies for several hours.  In the process the required bio-resonance frequencies are induced or loaded into the carrier material.  At the end the process, an amount of BioAktiv product is produced.

How does BioAktiv work?

When BioAktiv product is applied to animal manure, composting material, polluted water, or topsoil, the bio-resonance frequencies in the product cause the surrounding oxygen and other molecules in the sub-ecosystem to oscillate at these bio-resonance frequencies and as a consequence it immediate speeds up the multiplication of aerobic bacteria.  At the same time the multiplication of anaerobic bacteria is suppressed.  Aerobic bacteria are assured of adequate oxygen to multiply from the water which BioAktiv product is added.  In addition, bacteria that consume carbon release microscopic carbon dioxide bubbles, which is taken in by photosynthesizing micro-flora such as minute algae and mosses and converted into oxygen.  The additional oxygen further catalyses aerobic degradation process and prohibits anaerobic putrefaction process. The carbon dioxide released reduces the pH and restrict the generation of ammonia gas from waste matters.

Conclusion:

BioAktiv products catalyze the desired aerobic biodegradation process, prohibit the unwanted anaerobic putrefaction process, and reduce the release of ammonia gas.  BioAktiv products have also been found to be effective in enhancing livestock animal growth and health.

Do products of same carrier work the same?

No. As mentioned earlier different bio-resonance frequencies activate different microbial processes.  To manufacture BioAktiv products for the five different applications, different bio-resonance frequencies are loaded in the different BioAktiv products.  To achieve this, different high-energy sources, containing different sets of bio-resonance frequencies (superimposed together) are used for different BioAktiv products.  Depending on the application, a BioAktiv product can contain bio-resonance frequencies of certain trace elements and other compounds in addition to that of oxygen molecule.  The actual sets of bio-resonance frequencies are proprietary trade secrets of BioAktiv GmbH. 

Conclusion:

Four of BioAktiv products have the same calcium carbonate as carrier, but their applications are different.  Product of one application cannot be used for another application.

 

Are the products safe?

Yes.  It is obvious that the carriers used are safe because natural harmless substances widely used for the applications concerned.  BioAktiv GmbH guarantees that no radioactive energy of any kind is used and no other chemicals are added to the carrier material in the manufacturing of BioAktiv products.  BioAktiv products are guaranteed to be non-toxic and post no risks to human, animals and plants.

BioAktiv products do not have any detrimental effect in any case except perhaps when they are placed near equipment involving methane gas. The equipment may fail due to BioAktiv can reduce the production of methane gas.

Chemical analysis: Report of chemical analysis of the natural chalk carrier is as follows.

How to store BioAktiv products?

Store BioAktiv products indoor. Avoid long exposure of magnetic field, electric discharge light (such as neon light) and intense sunlight.